20
06/2014
Bodenschleifmaschine NEO 230, #74650
►
BT
-segment: For preparing concrete substrates
For grinding concrete, coatings and highgrade
compounds and for removing thin paint layers
on hard substrates.
Diamond segment BT, grit 20 #48038
Diamond segment BT, grit 40 #48041
Diamond segment BT, grit 60 #56303
►
PCD
-splinter segment #48036
For removing thin epoxy resin layers, paint,
synthetic resin, PU and dispersion adhesive.
Well suited for removing fleece backing and tex-
tile double backing. (On hard sub-surfaces only.
)
3.4 Set level regulator / body carriage (E)
► The machine must be positioned horizontally
when sanding/milling segments are attached.
For this purpose, the body carriage (7) may be
re-adjusted via the elongated holes of the level
regulator (6).
If the sanding segments have been used up, then
the machine may also be re-adjusted via the level
regulator (6) and positioned horizontally again.
The position may be checked using the provid
spirit level on the motor head
3.5 Dust extraction
►
Dusts from materials such as lead-containing
coatings, some wood types, minerals and metal can
be harmful to one’s health. Touching or inhaling
the dusts can cause allergic reactions and/or lead
to respiratory infections of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered carcinogenic, especially in connection
with wood-treatment additives (chromate, wood
preservative). Materials containing asbestos may
only be worked on by specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the work area.
– The use of a P2 filter class respirator is recom-
mended.
3.0 Maintenance
3.1 Transport / folding handle (B)
►
The handle of the machine may be folded over
for transport.
- Unscrew the clamping lever of the handle
fastener (2) in order to fold down the handle for
transport.
►The carrying grip (19) may be use
3.2 Mounting segments (C)
► Information on quick exchange of grinding
segments
- The grinding segments are inserted into
the groove and wedged outward by hammering
slightly (soft-head hammer).
- When grinding, the centrifugal force presses the
grinding segments to the outside.
- To replace worn segments, strike them to the
inside with a gentle hammer blow.
When centered, they can be removed easily.
3.3 Recommended segments (D)
►
ES
-segment: For preparing screed
For grinding and removing sintered layers of
screed and for removing thin paint layers on
soft mineral substrates.
Diamond segment ES, grit 20
#56306
Diamond segment ES, grit 40
#56308
Diamond segment ES, grit 60
#56309
►
PCD
-segment
#48028
For aggressive removal of PU coatings,
putty mass and tile adhesives
(for thick adhesive layers)
.