Installation Considerations
4
Installation Considerations
•
The warming drawer must be installed with a Wolf
stainless steel or integrated drawer front. Make sure
you have the accessory drawer front called for in your
installation. Specific installation instructions are
included with the drawer front.
•
For all installations, the warming drawer must be fully
enclosed, top and bottom.
•
The warming drawer platform must be able to support
200 lbs
(90 kg)
. The platform must be a minimum of 1"
(25)
above the toe kick to allow for the warming drawer
trim which overlaps
5
/
8
"
(16)
on all four sides.
•
Check with local utilities for electrical codes that apply
in your area. Local codes vary. Installation, electrical
connections and grounding must comply with applica-
ble codes. In the absence of local codes, the drawer
should be installed in accordance with National Electri-
cal Code ANSI/NFPA 70-1990 or latest edition.
•
Model WWD30O is CSA approved for outdoor
installations.
TOOLS AND MATERIALS REQUIRED
•
Minimum
3
/
4
"
(19)
thick lumber for the solid platform
that supports the warming drawer—must be able to
support 200 lbs
(90 kg)
.
•
Wood screws and hardware to install the platform.
•
Lumber for anti-tip block.
•
Power saw.
•
Level.
•
Drill and
1
/
16
" bit,
1
/
2
" bit also for integrated drawer
front application.
•
Phillips screwdriver.
•
2 wood screws (provided).
•
Wood cleats (optional).