Wolf WEG24R, Installation & Operation Manual

Page: 2 / 12

-
2
-
INSTALLATION, OPERATION AND CARE OF
HEAVY DUTY ELECTRIC GRIDDLES
GENERAL
Heavy Duty Electric Griddles are produced with quality workmanship and materials.
Proper installation, usage and maintenance of your griddle will result in many years of
satisfactory performance.
Thoroughly read this entire manual and carefully follow all of the instructions provided
INSTALLATION
Before installing, check the electrical service to make sure it agrees with the
specifications on the rating plate located in the upper right-hand corner of the control
panel. If the supply and equipment voltages do not agree, do not proceed with the
installation. Contact your dealer or Wolf immediately.
INSTALLATION CODES AND STANDARDS
Your Wolf griddle must be installed in accordance with:
In the United States of America:
1. State and local codes
2. National Electrical Code ANSI/NFPA – 70 (latest edition) available from The National
Fire Protection Association,1 Batterymarch Park,Quincy, MA 02269.
3. NFPA Standard #96 Vapor Removal from Cooking Equipment, (latest edition) available
From the National Fire Protection Association,Batterymarch Park, Quincy, MA 02269.
In Canada:
1. Local code
2. Canadian Electrical Code C22.1 Part 1 (latest edition) available from the Canadian
Standard Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada,
L4W 5N6.
UNPACKING
This griddle was inspected before leaving the factory. The transportation company
assumes full responsibility for safe delivery upon acceptance of shipment. Check for
possible shipping damage immediately after unpacking. If the griddle is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.