2
Pull the trim upward to remove it from the unit.
ISLAND TRIM INSTALLATION
Install the Island Trim
1
Slide the island trim down into the openings at the back of
the unit's side panels.
2
Use a Phillips screwdriver to install the screws into the
island trim.
BURNER ASSEMBLY REMOVAL
To remove the burner assembly, first remove:
1
2
Remove the Burner Assembly
1
Use a T-15 Torx bit to remove the two screws holding the
burner assembly to the orifice holder.
2
Lift the burner assembly from the burner pan.
3
Disconnect the electrode wire from the ignitor.
Burner Cap
Burner Assembly
Ignitor
Electrode Wire
BURNER ASSEMBLY INSTALLATION
Install the Burner Assembly
1
Attach the electrode wire to the ignitor.
2
Place the burner assembly into the burner pan.
3
Use a T-15 Torx bit to install the screws holding the burner
assembly to the orifice holder, torqued to 24 in lb.
BURNER PAN REMOVAL
To remove the burner pan, first remove:
1
2
3
Remove the Burner Pan(s)
Lift the burner pan(s) from the unit.
Sealed Burner Rangetop with Wok Service Manual
Component Removal and Installation
REMOVE THE ISLAND TRIM (continued)
service.subzero.com
828990 REV. A
12
