Pro Wall Hood Installation
18
Wolf Nameplate
The Wolf logo nameplate does not come installed on the
hood since there are various locations that the nameplate
can be attached.
Once you've decided on the location for the nameplate,
clean the mounting area with rubbing alcohol. Remove the
backing paper from the nameplate. Position the nameplate
aligned parallel with the bottom edge of the hood and
press into place.
Blower Assemblies
Pro ventilation hoods are shipped without the blower
assembly. Internal, in-line and remote blowers are avail-
able through your authorized Wolf dealer. For local dealer
information, visit the find a showroom section of our
website, wolfappliance.com.
The blower will vary in size and is dictated by the cooking
surface, the volume of air that needs to be moved and the
length of the duct run. Refer to ventilation recommenda-
tions in the Wolf design guide.
IMPORTANT NOTE:
Use only a Wolf blower with the pro
ventilation hood.
IMPORTANT NOTE:
Refer to specific installation instruc-
tions provided with each blower assembly for additional
mounting and wiring instructions.
