Pro Ventilation Hood Care
11
wolfappliance.com
Halogen Lighting
All Wolf pro ventilation hoods and hood liners have
halogen lighting with two settings. Halogen bulbs are
included with the hood.
For replacement, pro hoods and hood liners require 50 W,
120 V GU10 halogen light bulbs, which are available at
hardware stores or through your authorized Wolf dealer.
For local dealer information, visit the find a showroom
section of our website, wolfappliance.com.
A suction-cup-style light bulb changer is provided with all
pro ventilation hoods. Use this device when removing and
replacing the halogen light bulbs.
LIGHT BULB REPLACEMENT
IMPORTANT NOTE:
Do not handle the replacement
halogen bulb with bare hands. Direct contact with oil on
fingers will shorten the life of the bulb.
•
Turn off the blower and lights and allow the halogen
bulb to cool before replacing.
•
To remove, apply the suction cup to the light bulb,
push the bulb into the receptacle and rotate counter-
clockwise one-quarter turn. Refer to the illustration
below.
•
To install, using the light bulb changer, push the new
light bulb in and rotate clockwise one-quarter turn.
LIGHT BULB
CHANGER
Light bulb replacement.
Heat Lamps
Wolf pro 27" (686) deep wall hoods are equipped with
two heat lamp receptacles that require R40, 250 W
maximum bulbs. Heat lamp bulbs are not included with
the hood. The bulbs are available at hardware stores or
through your authorized Wolf dealer. For local dealer
information, visit the find a showroom section of our
website, wolfappliance.com.
HEAT LAMP BULB REPLACEMENT
•
Turn off the blower and lights and allow the heat lamp
bulb to cool before replacing.
•
Unscrew the heat lamp bulb and replace.
Use caution when replacing light bulbs. Adjacent parts
of the ventilation hood may retain heat.