12
|
English
TROUBLESHOOTING
Troubleshooting
OPERATION
Coffee system does not operate.
•
Verify power is on.
•
Verify electrical power to unit and home circuit breaker
is on.
Infuser is difficult to reinstall.
•
Before inserting, compress top and bottom ends of the
infuser together to adapt to the proper dimension for
installation.
•
Once inserted, verify two red buttons have snapped out.
‘LESS COFFEE’ message displayed.
•
Too much coffee has been used. Select a milder tasting
coffee or reduce the quantity of pre-ground coffee.
‘EMPTY CIRCUIT FILL CIRCUIT’ message displayed.
•
The water circuit is empty. Connect the hot water nozzle
and press
to deliver water from it, until it flows out
normally.
‘GENERAL ALARM’ message displayed.
•
Interior needs thorough cleaning. Refer to page 11.
If message displays after cleaning, contact your Wolf
service provider.
COFFEE QUALITY
Coffee not hot enough.
•
Preheat cups with hot water.
•
Change temperature in extended options.
Coffee does not have enough crema.
•
Coffee ground too coarsely. Refer to grind adjustment on
page 10.
•
Verify type of coffee used is for espresso machines.
Extraction time too slow.
•
Shorten extraction time by adjusting grind to coarser
pre-ground coffee. Refer to page 10.
Extraction time too fast.
•
Increase extraction time by adjusting grind to finer pre-
ground coffee. Refer to page 10.
Coffee does not come out of spouts.
•
Clean blocked spouts.
Coffee comes out from around service door.
•
Clean blocked spouts and thoroughly clean the coffee
guide.
Water comes out of spouts instead of coffee.
•
Clean pre-ground coffee funnel to unblock.
Milk does not come out of milk spout.
•
Verify intake tube is inserted in the rubber washer in the
intake tube.
Milk is not well frothed.
•
Clean milk container lid.
•
Adjust frothing regulator. Refer to pages 9–10.
Service
•
Maintain the quality built into your product by contacting
Wolf factory certified service.
•
When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to page 7 for rating
plate location.
•
For warranty purposes, you will also need the date of
installation and name of your authorized Wolf dealer. This
information should be recorded on page 2 of this guide.
