2
|
English
DOWNDRAFT VENTILATION
Contents
2
Downdraft Ventilation
3
Specifications
4
Installation
6
Troubleshooting
Features and specifications are subject to change at any
time without notice. Visit wolfappliance.com/specs for the
most up-to-date information.
Important Note
To ensure this product is installed and operated as safely
and efficiently as possible, take note of the following types
of highlighted information throughout this guide:
IMPORTANT NOTE
highlights information that is especially
important.
CAUTION
indicates a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING
states a hazard that may cause serious injury or
death if precautions are not followed.
IMPORTANT NOTE:
Save these instructions for the local
electrical inspector.
Product Information
Important product information including the model and
serial number are listed on the product rating plate. The
rating plate is located next to the blower housing on the
front side of the downdraft, below the countertop. Refer to
the illustration below.
If service is necessary, contact Wolf factory certified service
with the model and serial number.
Rating plate location.
RATING PLATE
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
a)
Installation work and electrical wiring must be
done by qualified person(s) in accordance with
all applicable codes and standards, including
fire-rated construction.
b)
Sufficient air is needed for proper combus-
tion and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent
back drafting. Follow the heating equipment
manufacturer's guideline and safety standards,
and the local code authorities.
c)
When cutting or drilling into wall or ceiling, do
not damage electrical wiring and other hidden
utilities.
d)
Ducted fans must always be vented to the
outdoors.
