8
W O L F
G A S C O O K T O P S
I N S TA L L AT I O N
S P E C I F I C A T I O N S
The illustrations below provide the overall
dimensions, countertop cut-out and installation
specifications for Model ICBCG365.
IMPORTANT NOTE: 991 mm wide cabinets are
recommended for installation of Model
ICBCG365.
A Wolf 914 mm built-in oven may be installed
below Model ICBCG365. For this installation,
unless you are using cabinets deeper than
610 mm, it is recommended that the electrical
and gas supply be placed in the base cabinet to
the right of the oven. Refer to installation
instructions provided with the built-in oven for
additional specifications.
If the Model ICBCG365 is installed above
cabinets, the gas and electrical placement is not
critical. A grounded outlet needs to be placed
within 1.2 m of the right rear of the cooktop.
When a 914 mm built-in oven is installed below
Model ICBCG365 , it is recommended that the
rough opening for the oven be 197 mm from
the floor to ease the use of the oven door.
IMPORTANT NOTE: When multiple cooktop
units are installed side by side, refer to the
countertop cut-out dimensions on page 9.
229 mm*
min
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
457 mm
495 mm
COOKTOP CUT-OUT
DEPTH
914 mm
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
330 mm
max
762 mm
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
610 mm
min
*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 457 mm above countertop.
**Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 457 mm above countertop.
889 mm
COOKTOP CUT-OUT WIDTH
889 mm
COOKTOP CUT-OUT WIDTH
991 mm
RECOMMENDED CABINET WIDTH
914 mm
min
102 mm
254
mm
89 mm
E G
914 mm OVEN OPENING
95 mm
min
64 mm
min
FRONT OF COUNTERTOP
495 mm
COOKTOP
CUT-OUT DEPTH
64**
mm
64 mm
min
Overall Dimensions
Countertop Cut-Out
533 mm
OVERALL
DEPTH
914 mm
OVERALL WIDTH
102 mm
M O D E L I C B C G 3 6 5
D I M E N S I O N S
Overall Width
914 mm
Overall Height
102 mm
Overall Depth
533 mm
Recommended
Cabinet Width
991 mm
Minimum Cabinet Depth
578 mm
Minimum Height Clearance 102 mm
Cut-Out Width
889 mm
Cut-Out Depth
495 mm
Unit dimensions may vary to ±3 mm.
I N S T A L L A T I O N S P E C I F I C A T I O N S – M O D E L I C B C G 3 6 5
Note
A:
Side
clearances.
If
the
distance
measured
from
the
periphery
of
the
nearest
burner
to
any
vertical
surface
is
less
than
200
mm,
the
surface
shall
be
protected
in
accordance of
AS/NZ5601.
Note
B:
The
rangehood
fitted
above
the
cooktop
must
be
installed
according
to
the
installation
instructions
for
the
rangehood.
A
minimum
distance
of
600
mm
is
required
for
a
range
hood
and
750
mm
for
an
exhaust
fan
.
Note A
Note B
102 mm
533 mm
OVERALL
DEPTH
COOKTOPS installation manual:Intl Gas Cooktops Install 31/3/10 2:24 PM Page 8
