Install the Cooling Fan
1
Connect the wire harnesses to the cooling fan. Double
check the HES wire harness connection.
2
Place the cooling fan onto the unit.
3
Use a T-15 Torx bit to install the cooling fan mounting
screw(s).
THERMAL CUTOUT (TCO) REMOVAL
WARNING
Disconnect the product from the power source
before starting this procedure.
To remove the TCO, first
, then remove:
1
Upper back cover
2
Remove the Thermal Cutout (TCO)
1
Use a
1
/
4
" combination wrench to remove the thermal limiter
bracket mounting screws.
2
Remove the wire connectors from the TCO.
3
Use a T-20 Torx bit to remove the TCO mounting screws
from the thermal limiter bracket.
4
Remove the TCO from the unit.
THERMAL CUTOUT (TCO) INSTALLATION
After installing the TCO, install:
1
2
.
Install the Thermal Cutout (TCO)
1
Place the TCO onto the thermal limiter bracket.
2
Use a T-20 Torx bit to install the TCO mounting screws into
the thermal limiter bracket.
3
Install the wire connectors onto the TCO.
4
Use a
1
/
4
" combination wrench to install the screws into the
thermal limiter bracket.
E Series Oven
Rear Component Removal and Installation
Install the Cooling Fan (continued)
service.subzero.com
829345 REVA
56
