4
Remove the convection fan assembly from the unit.
CONVECTION FAN ASSEMBLY INSTALLATION
After installing the convection fan assembly, install:
1
2
Install the Convection Fan Assembly
1
Connect the wire connectors to the convection fan.
2
Place the convection fan assembly into the opening.
3
Use a T-20 Torx bit to install the screws into the convection
fan assembly.
BAKE TRAY ASSEMBLY REMOVAL
WARNING
Disconnect the product from the power source
before starting this procedure.
To remove the bake tray assembly, first remove:
1
2
for single oven, and upper oven of
double oven
3
for lower oven of double oven.
4
5
for single oven, and lower oven of double
oven
6
for lower oven of double oven
7
8
Remove the Bake Tray Assembly
1
Use a T-15 Torx bit to remove the bake assembly spacing
bracket screws.
2
Pull the bake tray assembly forward.
3
Remove the cavity bottom panel.
4
Disconnect the bake element wire connectors from the rear
of the bake element.
5
Pull the bake tray assembly forward from the unit.
BAKE TRAY ASSEMBLY INSTALLATION
After installing the bake tray assembly, install:
1
2
3
for lower oven of double oven
4
for single oven or lower oven of double
oven
5
6
for lower oven of double oven
7
for single oven or upper oven of double
oven
8
Install the Bake Tray Assembly
1
Connect the wire connectors to the bake tray assembly.
2
Place the bake tray assembly into the unit.
3
Place the cavity bottom panel onto the bake tray assembly.
4
Push the bake tray assembly back to the rear wall.
5
Use a T-15 Torx bit to install the bake assembly spacing
bracket screws.
6
Make sure the cavity bottom panel is tight and flush with
the left and right cavity sides.
E Series Oven
Cavity Component Removal and Installation
REMOVE THE CONVECTION FAN ASSEMBLY (continued)
service.subzero.com
829345 REVA
54
