wolfappliance.com | 9
TRANSITION
For internal blowers, remove the existing 10"
(254)
round
transition. Refer to the illustration below.
For in-line and remote blowers with a front discharge,
leave the 10"
(254)
round transition in place.
For in-line and remote blowers with a rear discharge,
remove the 10"
(254)
round transition from the front and
the solid cover from the rear of the downdraft, then rein-
stall the transition on the rear and the solid cover on the
front.
Remove transition
Installation
DOWNDRAFT
Install the top mounting brackets using the #4 sheet metal
screws provided. Refer to the illustration below.
Install the lower mounting brackets using the #8 x 32
sheet metal screws provided, but do not tighten. The
brackets need to be adjusted once the downdraft is placed
in the opening. Refer to the illustration below.
Top mounting bracket
Bottom leveling bracket
Installation
