DCL-200 FD
1080p DLP LED Front Projector
User’s Manual
14
To activate the Projector, select the
TV/Projector
button on the IR remote control, then depress and HOLD the green POWER
ON
button at the top of the remote. The projector will turn on in approximately 30 seconds.
Step 2
- Aim the
remote at the Projector.
Depress and HOLD the
green
POWER ON
button
for 2 seconds to turn
on the Projector
Step 1
- Select the
TV/Projector
button
to activate all
the Projector IR
commands via the
remote control
5 Select from the desired components connected to the ProScaler:
Upon power up, the ProScaler defaults to the HDMI #1 input. Other inputs may be directly accessed via the numeric keypad on
the ProScaler remote:
To select from available
sources, first select the
SCALER
button, aim the
remote at the ProScaler
and then depress the
desired input button, as
noted on the keypad.
Projector:
The Projector will remain in a stand-by
OFF
mode until turned on via the supplied IR remote control, or by receipt of
a discrete
ON
command from your home automation control system.
Summary of Contents for DCL-200 FD
Page 1: ...DCL 200 FD...
