Wolf CTEIH42I Use & Care Manual Download Page 11

Page: 11 / 16

CHARCOAL FILTER REMOVAL

First remove the grease filter(s) as discribed on the

previous page. Then remove the charcoal filter as shown

in illustration below. Push the catch towards the inside

and turn the charcoal filter so that the two filter clips slip

out of their seats. Install the new charcoal filter using the

reverse procedure.

Cooktop Low-Profile Hood Care

wolfappliance.com

Charcoal Filter

RECIRCULATING APPLICATION

If the ventilation hood is used in a recirculating or non-

ducted application, the charcoal filter must be replaced at

regular intervals. The (F) touch pad of the hood controls

will flash to indicate when the charcoal filter needs to be

replaced. This indicator light flashes after approximately

120 hours of operation. To reset the hour counter, press

the (F) touch pad while the icon is flashing.

IMPORTANT NOTE:

Resetting the 120 hour counter for the

charcoal filter will not affect the 30 hour counter for the

grease filter.

Replacement charcoal filters are available through your

authorized Wolf dealer. For local dealer information,

visit the find a showroom section of our website,

wolfappliance.com.

GREASE

FILTER

CHARCOAL

FILTER

Charcoal filter removal.

Summary of Contents for CTEIH42I

















Search results

Summary of Contents for CTEIH42I

Reviews:

Related manuals for CTEIH42I

Brands by name

Popular brands

Wolf CTEIH42I, Use & Care Manual

Search results

Summary of Contents for CTEIH42I

Reviews:

Related manuals for CTEIH42I

Brands by name

Popular brands