Electric Cooktop Operation
10
SINGLE ELEMENT AND INNER ZONE
To activate a heating element, touch the OFF ON touch
pad that corresponds to the element you wish to use. The
power bar indicator will begin to blink and show a half-
power status.
To complete the activation, touch one of the following
symbols or touch pads of the element control while the
power bar indicator is still blinking:
•
Touch the
+
or
–
symbol to set the heat setting at
half-power output and complete the activation.
•
Touch HIGH to set the element at the highest heat
setting and complete the activation.
•
Touch SIM or MELT to set the element at the lowest
heat setting and complete the activation.
To change the heat setting—the element is activated and
the power bar indicator remains steadily lit:
•
Touch the
+
or
–
symbol to change the heat setting
incrementally up or down.
•
Touch HIGH to increase the setting directly to the
highest heat.
•
Touch SIM or MELT to decrease the setting directly to
the lowest heat.
•
Touch OFF ON to turn the element off.
Cooktop Operation
INITIAL START-UP
Before using your electric cooktop for the first time, clean
the glass-ceramic surface as recommended in the
cleaning section on page 15. The cooktop surface must
be free of any foreign substances, especially those that
could melt and permanently adhere to the glass-ceramic
surface.
When the cooktop is powered up for the first time it will
default to lock mode. To unlock the control panel, touch
and hold the key symbol for 3 seconds.
IMPORTANT NOTE:
A small amount of smoke and odor
may be noticed during the initial break-in period.
O
SIM
HIG
H
OF
F O
N
OF
F O
N
SIM
HIG
H
ZON
E 2
OF
F
ON
ME
LT
HIG
H
OF
F O
N
BR
IDG
E
SIM
HIG
H
ZON
E 2
ZON
E 3
OF
F O
N
HIG
H
SIM
CL
EA
R
Element activation (CT36E/S
shown).
Heat settings.
O
SIM
HIG
H
OF
F O
N
OF
F O
N
SIM
HIG
H
ZON
E 2
OF
F
ON
ME
LT
HIG
H
OF
F O
N
BR
IDG
E
SIM
HIG
H
ZON
E 2
ZON
E 3
OF
F O
N
HIG
H
SIM
CL
EA
R
OFF ON
TOUCH PAD
+
AND
–
SYMBOLS
SIM
TOUCH PAD
HIGH
TOUCH PAD
