Gas Range Installation
18
Troubleshooting
IMPORTANT NOTE:
If the gas range does not operate
properly, follow these troubleshooting steps:
•
Verify that electrical power is being supplied to the
range.
•
If nuisance clicking occurs when power is supplied to
the range, check the electrical outlet for reverse
polarity.
•
Check the gas supply connections to ensure that the
installation has been completed correctly.
•
Check that the gas supply shut-off valve is in the open
position.
•
If the range still does not operate properly, contact a
Wolf authorized service center. Do not attempt to repair
the range yourself. Wolf is not responsible for service
required to correct a faulty installation.
Range Removal
If removal of the gas range is necessary for cleaning or
service, shut off the gas supply. Unplug the range and
disconnect the gas supply line. Remove the range. Rein-
stall in the reverse order and be sure to check gas
connections for leaks.
Refer to the Wolf gas ranges use & care guide for cleaning
recommendations.
Unplug the range and disconnect the gas supply line
before removing.
