14
P
Feed both the Perimeter Wire (A) and the Extension Cable (B)
through the slot in the rear side of the Base Station.
P
Attach the Perimeter Wire connector to the Base Station Head (A).
P
Attach the 20 m (65 ft.) Extension Cable to the Base Station Head (B), if
not already connected.
P
Make sure that the Perimeter Wire and the 20 m (65 ft.) Extension Cable
are through the slot in the back of the Base Station.
P
Align the Base Station Head to the front of the Base Station (C).
)
Slide it in place along the side channels.
)
Push forward until the Head clicks into place.
P
Feed the 20 m (65 ft.) Extension Cable all the way to the Power
Box.
2.7
Placing The Base Station
Place Base Station on the Perimeter Wire.
P
Position the Base Station front facing a Anti Clockwise direction along the
lawn’s edge.
P
Place the Base Station on the Perimeter Wire.
P
Align the center marking on the front of the Base with the wire.
P
After the Base Station has been positioned, insert 2 rear stakes into the
Base Station holes. Only after the complete setup will be tested, you will
insert the 4 remaining stakes (See Section 3.3.5).
A
A
A
B
B
C
C
B
Insert 2 rear
stakes
73
en
Summary of Contents for Robo Scooter 1800
Page 359: ...Notes 359...
Page 360: ...360 Notes...
