15
G
1
Attention! Reverse blade
If the blade become jammed by thick
branches, for example, the hedge shears
must be shut off:
z
Pull out the power plug.
z
Do not touch running blades.
z
Remove the cause of the blockage.
z
Unplug the power plug from the socket.
z
Never use the connector cable to pull the plug
out of the socket.
z
Once the blades are idle, carry the shears by
the hand grips (keeping your hands away form
the blades).
z
Never carry the device by the connector cable.
z
After use, make sure the device is stored in a
way that the blades cannot be touched (blade
protection).
Cable
1
Attention! Electric shock through cable
damage
If the cable is cut through or damaged, the
safety fuse does not always trip.
z
Do not touch the cable before the power
plug is pulled out of the socket.
z
A damaged cable must be completely re-
placed. Patching the cable with insulat-
ing tape is not permitted.
z
Avoid bodily contact with grounded parts
such as metal fences.
z
Repairs to the cable should be performed only
by an expert.
z
Fasten the connecting cable to the stress relief
mechanism. Do not scrape against corners,
spikes or sharp objects.
z
Do not squeeze the cable between door jams
or through windows.
z
Keep cable away from the cutting area.
z
Switchgears must not be removed or bridged.
z
Use only extension cable not lighter than rub-
ber hose, type HO 7 RNF, minimum cross
section 3 x 1.5 mm
2
, length: max. 25 m.
z
Cables have to be protected against splashing
water.
Maintenance
1
Attention! Reverse blade
Before all maintenance and cleaning work:
z
Pull out the power plug.
z
Do not touch running blades.
z
Do not spray off the device with water. Do not
use high pressure cleaning or pressurised
steam to clean the device.
z
Do not store the hedge shears in humid rooms.
z
For safety reasons, replace worn or damaged
parts.
z
Repairs must only be performed at a location
staffed by experts.
z
If the connecting cable is damaged, it must be
replaced at an authorized specialist service
location in order to eliminate hazards.
z
Use only WOLF original replacement parts.
Otherwise there is no guarantee that the de-
vice will comply with the safety specifications.
Disposal
Assembly
Attach protective shield
z
Attach the protective shield as shown.
Power tools do not belong in
household garbage. Bring the the
device, accessories and packaging
to an environmentally-friendly recy-
cling location.
A
