Wolf Garten A 320 E, Manual

Page: 24 / 180

24
A320E
Servicing
EN
Cleaning the lawn mower
DANGER !
Risk of injuries due to the rotating mower
blade.
¾
Switch the motor off. Wait until the motor
blade comes to a standstill, and pull
out the mains plug before cleaning the
device.
Î Every time you use the lawnmower, clean it with a
hand brush after you have finished mowing.
Î
Clean the mulch flap with a hand brush at regular
intervals.
Attention !
Never spray the lawnmower with water or a
pressure washer.
Cleaning the grass collector
Note
It is best to clean the grass collector directly
after mowing.
Î
Raise the deflector flap
Î
Remove the grass collector.
Î
Lower the deflector flap again.
Î Empty the grass collector.
Î Clean the grass collector including the frame with
water or a hand brush.
Î
In particular, clean the area beneath the fill level
indicator.
Î Allow the grass collector to dry before next use.
Transport and storage
DANGER !
Risk of injuries due to the rotating mower
blade.
¾
Switch the motor off. Wait until the motor
blade comes to a standstill, and pull out
the mains plug before transporting or
storing.
Î
Secure the lawnmower sufficiently to prevent its
unintentional slipping if you are transporting it in or
on a motor vehicle.
Storage during winter
Î Thoroughly clean your lawnmower after every
mowing season.
Î
Arrange for a specialist workshop to check your
lawnmower in Autumn.
Î Store the lawnmower in a clean and dry room.
Î Protect the lawnmower against rust during long
storage periods in winter.
Replacing the mower blade (Fig .
O
)
WARNING !
Risk of injuries.
¾
Arrange for a specialist workshop to
replace the mower blade.
¾
Only work on the mower if the motor is
stationary.
¾
Pull out the mains plug.
¾
Wear suitable safety gloves.
Attention !
Grinding the mower blade can result in an
imbalance. Arrange for a specialist workshop to
check for imbalance.
Note
Use a torque wrench with a 13 mm socket to
change the mower blade.
Screw tightening torque:
M8: 14–16 Nm