SDC-12/SDC-15
10 8 0p D-IL A 3D Front Projector
2013 User ’ s Manual
52
RNR
MNR
BNR
Standard
Wide 1
Wide 2
Off
Mode 1
Mode 2
Mode 3
Mode 4
Inverse Telecine
Left
Right
Top
Bottom
Off
Adjust sharpness and detail enhancement via “[1-2-1] Sharpness” of the submenu.
Reduces unwanted noise in the video image. Adjust to preference.
Adjusts the intensity of random noise elimination of the image.
Values: (Low) 0 to16 (strong)
[0]
Adjusts the intensity of mosquito noise elimination of the image.
(*) It is not possible to set when the “Picture Mode” is set to “3D”.
Moreover, it is not possible to set it on certain HD signals.
Values: (Low) 0 to16 (strong)
[0]
Reduces the block noise of the video images.
(*) It is not possible to set when the “Picture Mode” is set to “3D”.
Moreover, it is not possible to set it on certain HD signals.
Settings: On, Off
[Off]
You can switch the color space as displayed by the projector.
Settings: Standard, Wide 1, Wide 2
Equivalent to the HDTV color space.
Equivalent to the color space of the DCI standard.
A color space that is broader than Wide1
It is possible to create and save custom gamma curves. Adjust to your preference.
To “[1-2-2] Custom Gamma” of the submenu.
It is possible to adjust and save desired color space calibrations.
To “[1-2-3] Color Management” of the submenu.
This setting improves scenes with fast motion, helping to produce clearer images with little residual image retention.
For PC and 3D signals, the “Clear motion Drive” cannot be used.
On occasions the image may appear distorted in some scenes, or light and dark flashes might occur. In this case, please choose
“Off”, and then a setting of your choice.
Settings: Off, Mode 1, Mode 2, Mode 3, Mode 4, Inverse Telecine
[Off]
Off
Black insertion weak
Black interpolation strong
Interpolation weak
Interpolation strong
With 60i/60p signals, e.g of TV-broadcast and DVDs, original 24 frame video image footage is changed to a 24 frame display.
(*) 24p will not function.
It is possible to visually confirm the effects of the settings in Mode 3 and Mode 4 of the Clear Motion Drive. Upon pressing the button
“OK”, it will be displayed on all sides of a screen in the center split into two parts. Finally, it will turn to “Off”. It cannot be set for PC
and 3D signals.
Settings: Left -> right -> top -> Bottom -> Off (changed with “OK” button)
[Off]
The left screen displays a demonstration of the Clear motion drive.
The right screen displays a demonstration of the Clear motion drive.
The upper screen displays a demo of the Clear motion drive.
The screen below displays a demo of the Clear motion drive.
The Demo of the Clear motion drive is turned off.
Adjusts the optical iris and aperture setting. A setting of 0 means fully opened.
Settings: (Dark) -15 to 0 (bright)
Enjoy more natural V4K
™
images with greater sense of depth.
[0]
Sharpness
NR
Color Space
Custom Gamma
Color Management
Clear Motion Drive
CMD Demo
Lens Aperture
MPC Level
1-2
Advanced
