37
SDC-12/SDC-15
LENS
5
Adjust Lens Shift (image position)
7
Turn Off Power
Adjust accordingly by pressing
the Up/Down/Left /Right buttons
• After adjusting the image position, it may be necessary to select “Pixel
Adjust” from the Settings menu “Installation”. (Reference page: 58 and in
the Manual Addendum document, where indicated)
• Every time the
button is pressed, the adjustment action will be
switched between “Focus”, “Zoom” and “Shift”.
It can also be switched with the button.
• AC power cannot be turned off for approximately 90 seconds once it has
been turned on. Begin operations only after 90 seconds time.
• You can also press the
button on the unit to turn off AC power.
• Carefully remove the AC power plug if the unit will not be used for a
prolonged period of time.
LENS
OK
While a
Confirmation
Screen is
Displayed
Blinking
(Red Lamp)
Cool Down
Mode
Light On
(Red Lamp)
About Cool Down Mode
• The Cool Down mode is a procedure
to cool the lamp for approximately
60 seconds after turning off the
projector. This function prevents
the internal parts of the unit from
deformation or damage due to lamp
overheating. It also prevents lamp
failure and premature shortening
of lamp life.
• During Cool Down mode, the
[STANDBY/ON] indicator blinks red.
• Once the Cool Down mode is
complete, the unit automatically
returns to the standby mode.
• DO NOT pull out the AC power plug
during Cool Down mode. This may
shorten the lamp life and cause
major system malfunctions.
1
2
3
6
Lens Memory Save
• Press the
button to display the available memories (aspect ratios)
• Select the desired memory and press the
button.
• Press
to exit.
OK
LENS
MEMORY
L
MENU
G
