© 2010 Wohler Technologies, Inc. All rights reserved.
14
RM-2435-HD User Guide
Programming the Hot Key Buttons
2.
VOLUME:
This option regulates the volume from -30db to 0db.
3.
BRIGHTNESS:
This option regulates the video brightness from
-116 to 139, where 0 is the typical value.
4.
CONTRAST
:
This option regulates the image contrast from -128 to
127, where 0 is the typical value.
5.
SATURATION
:
This option regulates the color saturation of the
image from -128 to 127, where 0 is the typical value.
6.
SHARPNESS
:
This option regulates the sharpness of the image
from 0 to 15, where 0 is the typical value.
7.
HUE
:
This option regulates the hue of the image from -32 to 31,
where 0 is the typical value.
The User Button
You can use the User button as a hot key. Assigning a parameter to this
button allows that parameter to be displayed and adjusted on-screen at
the press of the button without displaying and navigating through the
OSD Menu.
To program the hot key:
1.
Press and hold the Menu button.
2.
Use the Up and Down buttons to find the
CONFIG
sub-menu and
press the Enter button to select it.
3.
Use the Up and Down buttons to cycle to the User selection and
press the Enter button to select it.
4.
Use the Up and Down buttons to select the following eight
parameters. Press the Menu button to exit the sub-menu. (Refer to
Table 1–2
starting on
page 12
for the domain range for each of
these parameters.)
•
H/V DELAY
Note:
By selecting the
DEFAULT
option in the
CONFIG
sub-menu,
you can reset the parameters of the
BRIGHTNESS,
CONTRAST, SATURATION, SHARPNESS
, and
HUE
options
to zero (0).
