Page
26
reminder.
Touch
Back
to exit this menu.
Phase Configuration
Touching the
Phase Config
selection on the
Unit Settings
Menu proceeds to the
Phase Config Menu
. This menu is shown in Figure 2-18.
Figure 2-18: Phase Configuration Menu
The controls function as follows:
1.
Pair 1 - 8
: These switches allow you to select which channel pairs will
receive a phase meter on the
Metering Screen
. Generally, it is useful to
monitor the relative phase of stereo pairs. However, sometimes each
channel of a pair is unrelated to each other. This can be because the
channels are used to convey two independent monophonic signals or that
one channel may be a Center channel and the other may be a Low Frequency
Effects channel. In these instances, the Phase Indicator would almost always
indicate an out of phase condition. Because this would be a needless
distraction to the operator, switches are provided on this screen to
individually turn phase monitoring for each channel pair on or off.
2.
Cancel & Exit
: If you decide that you do not want to keep the settings you
have made on this screen, touch the
Cancel & Exit
button to discard the
changes and return to the
Unit Settings
menu.
3.
Save & Exit
: When you have finished making the changes you want on this
screen, touch the
Save & Exit
button to save the changes and return to the
Unit Settings
menu.
