Moisture Measurement of bulk material
27
Fig. 28: Filling the Moisture Scale with
the bulk material
CAUTION!
Take care that the cylinder of the scale is dry,
clean and not damaged.
Fill the sample into the cylinder of the Moisture
Scale.
NOTE!
For charging the cylinder, it is possible to use the
filling cup.
Fig. 29: Display after zeroing, when no
material has been filled in.
The display of the meter shows whether sufficient
sample material has been filled in:
Grey bar on the electrode: Increase amount >
More sample material has to be filled into the
scale
Green bar on the electrode: sufficient amount >
the sample is perfect
Red bar on the electrode: Decrease amount >
Reduce sample size
Fig. 30: Reading of the moisture valu u
As soon as sufficient bulk material has been
filled in, a green electrode will appear in the
display. At the same time the moisture value u
will appear in the bottom line of the readings
segment.
Use the arrow keys to go to the u readings
line.
Save the u- value by pressing the
-key.
