Page 78
Updating via the Web GUI using a Flash Drive
Use the following steps to update the
i
AM-AUDIO-2
PLUS
software:
1.
Copy the unzipped Wohler Update Package file(s) from your computer to the
root directory (not inside of a folder) of a USB flash drive. It must be FAT32
file type, and does not need to be empty. Refer to the
Download the
Software
section of this chapter for the specifics of download and file transfer
to the USB flash drive.
2.
Connect to the
i
AM-AUDIO-2
PLUS
with the Wohler Web GUI. Navigate to the
System | System Update
menu, as shown in Figure A-5. If the
i
AM-AUDIO-
2
PLUS
has recently been powered and it contains the Dolby Decoder option,
then a message may appear asking you to wait for a number of seconds so
that the decoder will be operational.
Figure A-5 – System Update Menu
3.
Click on the
Refresh
button.
4.
Available software update(s) are shown as in Figure A-6. Click the one you
want, followed by clicking the
System Update
button.
Important:
Do not interrupt or remove power to the
i
AM-AUDIO-2
PLUS
, or
remove the USB drive during the installation process.
Doing so
could crash the
i
AM-AUDIO-2
PLUS
software.
