Page 6
CHAPTER 1: Installation
Introduction
Overview
The
i
AM-AUDIO-2
PLUS
is a 2RU multi-channel multi-source audio monitor with
basic 3G-SDI and analog inputs. It may also be purchased with a large variety of
other inputs or these may be added later at the need arises. Refer to the
Specifications section of this manual or contact Wohler Sales for more information.
The
i
AM-AUDIO-2
PLUS
is compact and simple to operate, with straightforward
controls. It has two touch screen LCD displays providing high resolution level
meters and Loudness meters. Any channels (or channel pairs) from any audio/video
source stream may be monitored.
The
i
AM-AUDIO-2
PLUS
includes two 3G SDI inputs and it can monitor audio from
them. Optional modules will allow decoding of an additional SDI input, Dolby, MADI,
AES3, Dolby D, DD+, E, SMPTE 2110, SMPTE 2022-6, and AES streams. It contains
APIs for remote management.
Setups are created and configured using local menus and a web browser over a
network connection to the integral web server of the
i
AM-AUDIO-2
PLUS
. The web
server will also allow you to view the audio meters remotely.
Safety
Instructions
1.
Read, keep, and follow all of these instructions; heed all warnings.
2.
Do not use this equipment near water.
3.
Use only a dry cloth to clean the equipment.
4.
Do not block any ventilation openings.
5.
Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6.
Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).
7.
Protect the power cord from being walked on or pinched, particularly at plug
connection on the equipment and at the socket.
8.
Use only the attachments/accessories specified by the manufacturer.
9.
Unplug the equipment during lightning storms or when unused for long periods
of time.
Important:
By design, the supplied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.