wodtke Primarofen PO 03-2 easy.nrg, Assembly And Operating Instructions Manual

Page: 33 / 68

Manual_S5_Airplus_2015_04_20 Page 33 / 68
©
Wodtke GmbH - Tübingen. All Rights and Changes Reserved.Printed 04/2015 Part No. 950 976
Note:
If pellets have been filled for the first time or the
screw conveyor has run completely empty, the
pellets (
Fig. 60
) must first be transported by the
screw conveyor until they can fall into the burner
pot (B). In this case, the starting process / ignition
may fail because the pellets fall into the burner pot
too late. Proceed as described below in order to
prevent this. This process takes approx. 3-4
minutes and must also be repeated if the pellet
container (A) has run completely empty.
Proceed as follows to fill the screw conveyor with
pellets for the first time or after running empty:

Fill pellets.

Press button 1x and wait approx. 3
minutes until pellets audibly drop into the
burner pot (a distinct clicking can be
heard).

As soon as the first pellets drop into the
burner pot, press the button again.

The unit is now ready for operation and can
be started (see following chapter).
Fig. 60: pellet transport in PO 03
B
A