WNC M14Q2SG, User Manual

Page: 15 / 37

15 / 37
□ Normal □ Intern al Use

Confidential □ Re stricted Confidential
User Manual
SPI_MISO 2nd_SPI master in slave out I
SDC1/1st_SPI
SDC1_DATA_3 SDC1_DATA_3 I/O
1st_SPIM_MOSI 1st_SPI master out slave in O
SDC1_DATA_2 SDC1_DATA_2 I/O
1st_SPIM_MISO 1st_SPI master in slave out I
SDC1_DATA_1 SDC1_DATA_1 I/O
1st_SPIM_EN_1 1st_SPI chip select O
SDC1_DATA_0 SDC1_DATA_0 I/O
1st_SPIM_CLK 1st_SPI serial clock O
SDC1_CMD SDC1_CMD I/O
SDC1_CLK SDC1_CLK O
Module Control and
State Interfaces
WWAN_STATE Wireless WAN Radio State O
POWER_ON Power On the module I
WAKEUP_OUT Module wakes up host OR GPIO O
WAKEUP_IN Hostwakes upmodule OR GPIO. I
RESET Reset the module I
Power and Ground
VREF Voltage Reference Output O
VCC Main Power I
GND GND I
General Purpose
GPIO Digital I/O I/O
ADC_CONVENTOR ADC_CONVENTOR I
AUDIO PCM/I2S
PCM_DIN PCM_DIN IO
AUX_BT_I2S_DATA0 AUX_BT_I2S_DATA0 IO
PCM_DOUT PCM_DOUT IO
AUX_BT_I2S_DATA1 AUX_BT_I2S_DATA1 IO
PCM_CLK PCM_CLK O
AUX_BT_I2S_SCK AUX_BT_I2S_SCK O
PCM_SYNC PCM_SYNC O
AUX_BT_I2S_WS AUX_BT_I2S_WS O
RFU RFU RFU Reserved For Future Use I
Debug JTAG
MDM_JTAG_SRST_N JTAG reset for debug I
MDM_JTAG_TCK JTAG clock input I
MDM_JTAG_TDI JTAG data input I
MDM_JTAG_TDO JTAG data output O
MDM_JTAG_TMS JTAG mode select input I
MDM_JTAG_TRST_N JTAG reset O