07-01-2003 WMS Gaming
2 of 7
16-009323-03 Installing CPU-NXT (A-006182-
xx)
I
NSTALLATION
B
ULLETIN
16-009323-03 Installing CPU-NXT (A-006182-
xx)
Preparing for Procedure
Preparing for Procedure
Image 1
. ESD strap on arm.
ELECTROSTATIC
DISCHARGE (ESD)
WARNING
Electrostatic discharge (ESD) damage
causes complete and/or intermittent
failures to video game components. Take
all necessary precautions to avoid
damage.
Use the following anti-static steps before
proceeding.
1. Fasten the ESD wrist strap on arm and
ensure that it makes good skin contact,
Image 1
.
2. Connect the clip end of the strap to a
ground point.
3. Remove the CPU-NXT board from anti-
static packaging and place directly on ESD
mat.
4. Install the Boot EPROM on the CPU-NXT
board at location XU1, ensuring the notch
in the EPROM is properly aligned,
Image 2
.
5. Install the jurisdictional identification chip at
XU12, ensuring the notch for the SPI is
properly aligned.
6. Insert the RAM Clear CF card into the CF
drive,
Image 3
. Use the direction indicator
on the CF card to ensure proper insertion.
END PREPARING FOR PROCEDURE
Image 2
. Boot EPROM installed, notch
called out.
Image 3
. CPU-NXT board, compact flash
drive called out.
