WMS Bluebird Series Service Manual & User Manual Download

Page: 47 / 116

2-11

Installing the Top Box

16-020834-00

Install Two Crown

Pieces

Two Crown Pieces, located in the final packet assembly of certain Top Boxes, are mounted to the front
of the Top Box Frame. Each Crown Piece is made up of two components: the outside rail and the inside
bracket,

Table 2-7

. These two components are combined, with only the part number for the inside

bracket being visible.

Complete the following steps to install the two Crown Pieces:

On the left side of the Top Box Frame, engage the 8-32 mounting stud on the left Crown Piece,

Figure 2-14

(A), with the slot provided on the Top Box,

Figure 2-15

(A).

Figure 2-14 One of two Crown Brackets.

Figure 2-15 Mounting setup for left Crown Piece (left) and the outside view of properly mounted crown (right).

Engage the mounting tab on the Crown Piece,

Figure 2-14

(B), with the 8-32 mounting stud on the

Top Box,

Figure 2-15

(B).

Use an 11/32'' nut driver or socket wrench to secure the two mounting studs with two 8-32 Keps
nuts (4408-01128-00),

Figure 2-16

(A).

Figure 2-16 Secured Crown Piece.

Repeat the previous three steps to install the right crown piece.

Table 2-7 Part Descriptions for Crown Pieces.

Part Numbers

Description

01-012374-01-01

bracket: tooth gap filler left (visible part number on left Crown Piece)

21-011055-01D01

rail: top box chrome left

01-012374-01-02

bracket: tooth gap filler right (visible part number on right Crown Piece)

21-011055-02D01

rail: top box chrome right

Summary of Contents for Bluebird Series





















































































































Search results

Summary of Contents for Bluebird Series

Reviews:

Related manuals for Bluebird Series

Brands by name

Popular brands

WMS Bluebird Series, Service Manual & User Manual

Search results

Summary of Contents for Bluebird Series

Reviews:

Related manuals for Bluebird Series

Brands by name

Popular brands