WMF Insulation mugs
Commuters and anybody who’s on the move a
lot knows how good it is to have a cup of hot
tea or coffee at hand at any time, wherever they
are. The WMF Impulse insulation mugs keep hot
drinks warm for a long time. Its stylish design
means you can enjoy your hot drink in style whe-
rever you are, and by not using disposable cups
you are helping to protect the environment.
Quality features
The thermal mugs keep drinks at the right
temperature for several hours.
They come in two designs: Casing in high-quality
plastic with single-walled thermal liner made of
Cromargan®: 18/10 stainless steel. Alternatively,
stainless steel model made of double-walled
Cromargan®: 18/10 stainless steel.
The vacuum between the stainless steel walls
reduces the amount of warmth lost and increases
the insulating performance.
360-degree opening enables you to drink from
all angles.
Easy to clean and hard-wearing when the
following instructions are observed.
Please read the following instructions for use
and care completely before using this product
for the first time.
Instructions for use
Rinse the mug out with lukewarm soapy water
before using the first time and leave it to dry out
properly.
To get the best insulating performance you
should rinse your mug before use with hot or
cold water.
Never use the microwave, hotplate or the oven
to pre-warm the mug.
Fill the mug up to no more than about 2 cm un-
derneath the pouring stopper, never fill right to
the top.
To open, press the push plate on the lid down-
wards. 360-degree opening enables you to drink
from all angles. To close, press the push plate
downwards again.
To fill the mug, twist the lid anti-clockwise and
pull upwards.
EN
4
