28
User Manual WMF Cup / WMF Cup&Cool
Care
5.5 Defrosting the cooler
Follow the manual
• If damaged, coolant may escape from the
cooling circuit. Coolant is explosive.
> Never remove the ice layer with sharp or
pointed objects. The surface of the interior of
the cooler could be damaged.
> Do not use heating appliances (hair dryer,
heat gun, steam cleaners, etc.) to defrost.
Avoid malfunctions and save energy.
• If the ice layer is more than 3 mm thick,
defrost the cooler.
• For coolers with integrated low-level
messages, any ice build-up on the rear
vertical wall should be avoided.
Switch off cooler using the ON/OFF switch at the
top right on the rear cover
Disconnect mains plug
Leave the front door open
Wipe away the water from melting ice with
a soft cloth
Close the front door before switching on again
WARNING
Follow the Warranty chapter
w
IMPORTANT
Follow the Warranty chapter
w
