WMF cafemat! User Manual Download

Page: 66 / 88

User Manual WMF cafemat!

Care

5.1

Cleaning program

The software runs through the entire cleaning program.

Cleaning program - see “Brief instruction cleaning“

5.2

Drip tray cleaning

Check whether drip tray is empty

Carefully remove the drip tray

Clean the drip tray

Carefully replace the drip tray

Insert again carefully so that no water accidentally drips
down.

5.3

Cleaning brewer area

Allow brewer to cool before cleaning
Clean weekly with a clean, damp cloth

Clean the brewing area around the brewer and the

wiper with a brush

5.4 Filter change

(for Version 03.01.001 and higher)

Follow the user manual for the water filter for a filter
change.
After a filter change, perform the rinse as guided by the
display.

Hot liquids in the

dispensing area.

Observe the Safety chapter .

Hot liquids in the

dispensing area an in

the drip tray.

Observe the Safety chapter .

Burn hazard

Scalding hazard

Follow the User Manual .

Filter change, see
"Care" chapter

Summary of Contents for cafemat!

























































































Search results

Summary of Contents for cafemat!

Reviews:

Related manuals for cafemat!

Brands by name

Popular brands

WMF cafemat!, User Manual

Search results

Summary of Contents for cafemat!

Reviews:

Related manuals for cafemat!

Brands by name

Popular brands