WMF cafemat! User Manual Download Page 10

Page: 10 / 88

User Manual WMF cafemat!

Introduction and General Information

Signs and symbols used in the user manual

For a detailed description of the warnings, see Safety

Caution.

Risk to machine.

Caution.

Risk to user.

Follow the User Manual .

Observe the Safety chapter .

Caution.

Hot liquid.

Caution.

Hot surface.

Observe the Safety chapter .

Caution.

Bruising or crushing

hazard.

Observe the Safety chapter .

Tip

Instruction

Cross reference

Start position

Main menu

Very important.

Must be strictly

observed.

If the menu symbol is shown in this user manual, the
description starts at the start position.

Call up the main menu:

Touch

The main menu is displayed.
There are other display options; see Main menu chapter.

Main menu

Summary of Contents for cafemat!

























































































Search results

Summary of Contents for cafemat!

Reviews:

Related manuals for cafemat!

Brands by name

Popular brands

WMF cafemat!, User Manual

Search results

Summary of Contents for cafemat!

Reviews:

Related manuals for cafemat!

Brands by name

Popular brands