WMF 8900 Series User Manual Download

Page: 57 / 88

User Manual WMF 9000 F GV

Software | USB

Eco mode display

The Eco mode symbol is displayed in the header bar of
the “Ready to operate” display.
There are two states.

Eco mode “active”

The coffee machine is currently in the reduce phase.

Eco mode “ready”

Eco mode is based on idle time, 10 minutes after the
latest beverage has been dispensed.

immediate start

When Eco mode is set to “active,” the Eco mode symbol
is shown on the “Ready to operate” display.

Pressing the symbol activates Eco mode immediately.
The symbol changes to “active.”

4.13 USB

Data exchange is possible via the USB connection.
The USB connection is at the top left on the reverse
side of the operating panel, behind a cover.

Load recipes

Saved recipes are loaded here.

Load beverage symbols

Load photos or beverage symbols from USB stick.

DI_usb

Load recipes

DS_04_14_01

Load beverage symbols

DS_04_14_02

Summary of Contents for 8900 Series

























































































Search results

Summary of Contents for 8900 Series

Reviews:

Related manuals for 8900 Series

Brands by name

Popular brands

WMF 8900 Series, User Manual

Search results

Summary of Contents for 8900 Series

Reviews:

Related manuals for 8900 Series

Brands by name

Popular brands