Care
46
>
Unscrew the black cap (
4h
) from the air intake pipe.
>
Mix one measuring cap of WMF milk system cleaner with 200 ml water in a container.
>
Place all parts of the milk system in the cleaning solution for minimum 5 hours or overnight.
>
Finally, rinse all the parts thoroughly under running water.
>
Clean the opening of the beverage spouts with the brushes provided.
>
Assemble the milk foamer again in the following manner (see illustration on page 45 on the right hand
side):
- Push the top section into the lower section (
4f
), so that it clicks in place.
- Screw the air inlet pipe (
4g
) in place.
- Screw the black cap (
4h
) onto the air inlet pipe.
- Insert the milk hose (
4c
) into the milk foamer again.
>
Insert the milk foamer into the All-in-One spout from below.
>
Push the All-in-One spout downwards.
>
Insert the milk hose into the guide.