Factory configuration file sample (for WM-E Term):
https://www.m2mserver.com/m2m-downloads/WM-E1S_STD_default.zip
For the operation of the modem cellular network communication and SIM card
settings (such as APN, password, and account) are required.
In addition, be sure to review and save the transparent mode data speed functions in
the WM-E Term program for the RS232, RS485 settings. In addition, you must send
the configured configuration to the modem using the program - according to the
configuration software’s User
Manual document.
WM-E Term User Manual:
https://www.m2mserver.com/m2m-downloads/WM-E-TERM_User_Manual_V1_92.pdf
3.3 Sending an SMS about the meter
Depending on the meter configuration, by using the modem, the meter can send SMS
message corresponding to standard AT commands to the phone number which was
configured at the meter side.
It is worth configuring this primarily for alarms and special events, according to the
capabilities of the meter.
No other settings are required in WM-E Term
®
.
Summary of Contents for WM-E1S
Page 19: ...J J I ...
