•
The readings shown as standard IEC format, including some ASCII control
characters
like STX ETX, etc. also.
-
Alarm Push (sending alarms)
- starting when new event can be read from meter
•
Alarm Push method triggers TCP sending of a DLMS WPDU contains the IP
address,
•
listening port number for transparent service, and the meter ID.
- Triggering with SMS
•
GPRS connection can be activated remotely with a defined SMS from any call
number.
•
The SMS text must be left empty.
•
After the SMS received, the modem will connect to IP network, and will be
accessible as a IP server for a time period defined in the config file.
•
Example config file will be provided with a 30 minute setting.
2.16 LED operation during the CSD call
The CSD call consists of two parts:
a.) We want to read / configure a meter in transparent mode
b.) We want to perform a modem configuration / firmware update
To read / configure a meter in transparent mode:
- The LED configured for GSM / GPRS status will be lit continuously during the CSD call.
- The LED that is configured for e-meter status will flash according to the CSD call
status:
• It will flash every half second from the beginning of
the connection to the end of the
connection / If the measuring interface is not configured for a baud rate of 9600, the
LED will be lit continuously from the beginning to the end of the connection
Summary of Contents for WM-E1S
Page 19: ...J J I ...
