Chapter 3. Installation
3.1 Installation steps
Step #1: Ensure that the device is not
powered on, remove the AC connector (1).
Step #2: Insert a replaceable and active
SIM card (with APN) into the SIM-holder (5
)
- the chip looks down, and the cutted edge
of the SIM looks to the modem. Push the
SIM until it will b efastened (you will hear a
click sound).
(If necessary, the SIM card can be easily removed by pressing the card again, causing the card
to be ejected from tray.)
Step #3: Mount external magnetic base antenna (12) corresponding to the communication to the
antenna connector (4).
Step #4: Connect the modem to your computer with the RS232 cable (2) and an RS232-USB
converter for the configuration.
Note that the modem can be programmed only through
RS232 connection!
Step #5: Connect the modem's AC power connector (1) - wire socket connection or "pigtail" to
the external power supply (to a 100-230V AC input).
Step #6: Configure the modem with the WM-E Term
®
software.
Step #7: After completing the configuration, remove the R232 cable (2) from the PC.
Step #8: Disconnect the modem AC power connector (1) from the meter (or power source). The
modem will be shutting down.
5
