-
Answer incoming voice calls as data calls (CSD)
if set to true. Ingore voice calls otherwise.
Here you can enable the CSD transformation of voice calls.
-
Provider selection mode (roaming)
–
only if you attempt to define a dedicated mobile
network to use. The selection list is provided by the international mobile operators. The
connection method can be
Manual or Automatic. Here you can add, delete or define the selection
mode.
4.
Push the
OK
button and continue with the next part.
5.4 Watchdog settings (monitoring the modem operation and
availability)
The device is able to perform manual/auto reboot with the following options configurable from
both the configuration program (WM-E Term). You can configure here the following reboot
options:
•
Auto reboot to be disabled (configurable)
•
Manual reboot (caused by any configuration modification)
•
Auto reboot will run periodically based on a configurable timer which can be set up to
24 hours (configurable and can be scheduled)
The auto reboot via watchdog timer will monitor 'keep alive' message coming from the CPU at
predetermined intervals. If the watchdog timer stops receiving the 'keep alive' message from the
CPU, the watchdog timer will initiate a reboot. The watchdog feature is running independently
from the CPU.
1.
Choose the
Watchdog
parameter group and push the
Edit values
button, and the relevant
parameters and their values are listed.
2.
At the bottom side of the screen fill in the following fields:
-
Ping IP address
–
add an IP address which can be accessed from the IP zone of the SIM
card. This will be used for continuous checking of the network availability.
-
Number of ping-retries
and
Ping wait time reply
and the
Ping wait-time
(for next
cycle) in msec valu are here configurable.
