R200
Industrial Cellular Router User Manual
www.wlink-tech.com
16
Figure 3-2
Cellular Settings GUI
Table 3-2
Cellular Setting Parameter Instruction
Parameter
Instruction
Enable
Enable SIM card dial
ICMP check
To enable or disable ICMP check rules. Enable the ICMP check
and setup a reachable IP address as destination IP. Once
ICMP check failed, router will switch SIM card.
Custom Options
Connect Mode
Keep alive (Auto-online).The router will automatically
connect 3G/4G network and keep online.
Connect On Demand. Idle offline if no data from LAN to
3G/4G within defined time.
Schedule, Define online and offline time. This function
need to enable NTP function,
Call/SMS Triggered. Call/SMS trigger router online.
Manually. Connect 3G/4G network by manual.
MTU
Maximum Transmission Unit is 1492 as default. It supports
other value as requested.
PIN Code
Input SIM card PIN code if SIM is setup PIN by ISP.
APN
A
PN, provided by local ISP, usually CDMA/EVDO network do
not need this parameter.
User
SIM card user name is provided by ISP
Password
SIM card password is provided by ISP
【
ICMP Check
】
Enable ICMP, Router will automatically check whether the defined IP address is
reachable per 60s. If the IP address is unreachable and ICMP check is timeout at
the first time, it will check 2 times every 3 seconds. If the third time is still failed, the
router will redial.
The ICMP Check IP is a public IP or company server IP address.
Step 2 After Setting, please
click “save” icon.
----End
3.2.3
LAN Setting
Step 1
Single Click “ Basic Network>LAN” to enter below interface
