R200
Industrial Cellular Router User Manual
www.wlink-tech.com
10
2.3
Dimension
Figure 2-2
WL-R200 Series Router Dimension Figure
2.4
How to Install
2.4.1
SIM/UIM card install
If use dual SIM/UIM card router, you may need insert dual SIM before configure it. After
installation, please follow below steps to connect the router.
Before connecting, please disconnect any power resource of router
2.4.2
Ethernet Cable Connection
Use the Ethernet cable to connect the cellular Router to computer directly, or transit by a
switch.
2.4.3
Serial Port Connection
If you want to connect the router via serial port to laptop or other devices, you should
prepare a serial port or RJ45 cable, this cable is optional. One end connect to computer
serial port, the other end connects the console port of the router
Before connecting, please disconnect any power resource of router
2.4.4
Power Supply
In order to get high reliability, WLINK Series Router adapt supports wide voltage input
range: +5V
～
+36VDC, support hot plug and complex application environment.
