WLINK WL-G230 Series, User Manual

Page: 16 / 87

WL-G230 Series Router User Manual
16
Table 2-2 WAN Setting Instruction
Parameter Instruction
Enable Modem Enable/Disable 5G mode.
Use PPP ECM dialup as default. PPP is suitable for 4G connection only.
ICMP check If enable ICMP check and setup a reachable IP address as
destination IP, the router will reconnect/reboot once ICMP
check failed.
Cellular Traffic Check The router will reconnect/reboot once there’s no Rx/Tx data.
MTU MTU configurable. 0 as default for MTU 1500
CIMI Send to Send CIMI to a defined IP and port by TCP protocol.
SMS Code Remote control the router by SMS. Only the configured SMS
code will work.
Operator Lock Lock a specified operator for the router by MCC/MNC code.
Mode
【
Auto
】
The router will automatically connect to 3G/4G/5G
networks and give priority to 5G.
【
5G NR
】
Router will connect to 5G only.
【
LTE
】
Router will connect to 4G only.
【
3G
】
Router will connect to 3G only.