863-668
© Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Connectors and Operators
Frontside:
1. Volumeknob
2. Microphoneplugs
3 .Bass-Adjust
4 .Treble-Adjust
5. Balance-Adjust
6. Input-Selector
7. Echo-/Delay-Adjust
8. VFD-Switches
9. Modeswitch
2-channel/3-channel/5-channel
10. Separate-Volume
12. DSP-Switches
13. Power ON Knob
14. Speech
15. Auto
16. Muting
18. Microphone-Volume
Rearside:
Loudspeaker
Connection Figure 1
230V
AC-Cord
Loudspeaker-Connection
•
Make sure that you have left (L) and right (R) channels correctly connected.
•
Also take care of the right polarity and follow the (+) and (-) label on the unit.
•
Do not let the bare speaker wires touch each other or any other metal part,
as these could damage the Amplifier.
•
When using 2 speaker-systems, the impedance shold not be lower than 8 ohm for each system.
•
Otherwise the amplifier may be damaged under high power and long term operation.
•
To connect the speakers follow the figure 1 and 2 to operate in the right way.
