WIZ620wi User’s Manual
(WIZnet Co., Ltd.)
50
DH
Get Broadcast SSID
0:Enable, 1:Disable
<Sx>
GH
Set Broadcast SSID
0:Enable, 1:Disable
<x>
DM
Get WMM
1:Enable, 0:Disable
<Sx>
GM
Set WMM
1:Enable, 0:Disable
<x>
DA
Get MAC Access Control
0:Disable,1:AllowListed,2:DenyListed[_count[_MACaddr
ess]]
<Sx_x_xxxxxxxxxxxx_xxx~>
GA
Set MAC Access Control
0:Disable,1:AllowListed,2:DenyListed[_1:add,2:delete_co
unt_MACaddress]
<x_x_x_xxxxxxxxxxxx_xxx~>
DI
Get Site Survey
SSID_BSSID_Channel_RSSI_Security_wlanMode
If the SSID is “ “, the AP of the peer is hidden status.
<Sxxxx_xxxxxxxxxxxx_xx_xx_x>
GI
Set Connection AP
To use <GI>command, perform the <DI> command
for site survey.
Connect to the SSID searched by site survey.
If the authentication is WEP and default keyId is not
“1”, the connection is not allowed. In this time, the
connection should be done using <GU> command.
SSID: SSID of AP
Key: Encrypting Key of AP <ssid_key>
DT
Get WPS
0:disable, 1:enable[_status_pin value]
<Sx_x_x>
GT
Set WPS
0:disable, 1:enable[_1:pin, 2:pbc[_pin value]]
<x_x_x>
QP
Get
Module Status
Checking
connection status_SSID_BSSID_CHAN_RATE_RSSI
Conn_status: ‘0’ is not connected, ‘1’ is connected.
<Sx_xxxx_xxxxxxxxxxxx_xx_xxM_xx>
SECURITY