Copyright © WIZnet All Rights Reserved
WIZ110SR | 24 page
4.2.
WIZ110SR Configuration with Serial Command
①
Check WIZ110SR Firmware version. If version is lower, download the latest firmware from
download page of
http://www.wiznet.co.kr
Figure13. Serial Configuration Enable Setting
②
At the default status, the serial configuration is disabled. So, click „enable‟ check box of
serial configuration and click „setting‟ button. The defaut value of string is “+++”.
③
The testing can be processed as below, This testing is for checking module IP and
changing it to another.
1 Input “+++”
Enter Serial Configuration mode
2 Check “<E>” response
Successfully entered
3 Input “<WI192.168.11.3>”
Change the IP address to 192.168.11.3
4 Check “<S>” response
Sucessfully change the IP address
5 Input “<RI>”
Check IP address of the module
6 Check “<S192.168.11.3>” response
Check changed IP address
7 Input “<WR>”
Re-boot
