Wiznet WIZ110SR, User Manual

Page: 22 / 31

Copyright © WIZnet All Rights Reserved WIZ110SR | 22 page
Command Code
Command Parameter Comments
WI xxx.xxx.xxx.xxx (eg. 192.168.11.133) Set Local IP
WS xxx.xxx.xxx.xxx (eg. 255.255.255.0) Set Subnet mask
WG xxx.xxx.xxx.xxx (eg. 192.168.11.1) Set Gateway
WP 0~65535
Set Local IP‟s port number
WD 0 : Static, 1 : DHCP, 2 : PPPoE Set the IP configuration method
WM 0 :TCP Client, 1 :TCP Mixed, 2 :TCP Server Set the TCP operation mode
WK 0 : TCP, 1 : UDP Set Protocol(TCP or UDP)
WB
XXXX
eg. [Baudrate]1: 115200, 2: 57600,
3: 38400, 4: 19200, 5: 9600,
6: 4800, 7: 2400,8: 1200
[data byte] 7 : 7bit, 8bit
[parity] 0 : no parity, 1 : Odd, 2 :Even
[Flow] 0 : no, 1 : Xon/Xoff, 2 :RTS/CTS
Set the serial baud rate, data, parity
and flow control.
4bytes:[Baud][data byte][parity][flow]
WT 0 : Disable, 1 : Enable Set the serial command method
WU 0 : Not Use, 1 : Use DNS Use or not
WE xxxxxx (eg. In hex format : 2B 2B 2B) Set the command mode character
WX xxx.xxx.xxx.xxx (eg. 192.168.11.144) Set server IP address
WN 0~65535 Set server port number
WR Restart
WV xxx.xxx.xxx.xxx (eg. 255.255.255.0) DNS IP Setting
WW
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
(eg. wiznet.co.kr)
Domain Setting
WY PPPoE ID PPPoE ID Setting
WZ PPPoE Password PPPoE Password Setting
OC XX Set delimiter character in hex
OS 0~255 Set delimiter size
OT 0~65535 Set delimiter time
OI 0~65535 Set Inactivity timer value
RA MAC Address Get MAC Address
RU 0 : Not Use, 1 : Use Check DNS Use or Not
RV IP address DNS IP Check
RW Domain Domain Check