WIZ-iRadio User’s Manual
© Copyright 2008 WIZnet Inc. All rights reserved
16
There are RAM_MODE and FLASH. In the case of RAM_MODE, it is used for operating at the
internal RAM after writing the F/W and downloading with JTAG device such as MultiICE. The
FLASH is used for operating after writing in the flash memory of STR710FZ2. You can select one
of them. For the not-used mode, mark it as commentary.
The program starts from 0x400300000 of flash memory at the Boot. The scat file in the Boot
folder is as below (please refer to Figure 9).
Figure 9. Boot - Scat
4.3. Compile Environment & Process
WIZ-iRadio is developed by using RealView and MultiICE of ARM. If the source file has ‘prj’
extension, it is the project file of RealView.
-. App : \App\REALVIEW\network.prj
-. Boot : \Boot\REALVIEW\network.prj
