W7500S2E serial to Ethernet module
W7500S2E user manual
43
7.2
Basic Settings
Figure below shows W7500S2E basic settings page. It separates into four sections.
On each screen, you may need to click “Save Settings” before you move onto the next screen.
After you've done that, you may click “Reset” to reset the module for the settings to be
applied.
Please know that the session time for the W7500S2E webserver is 5 minutes. After 5 minutes
of inactivity, re-login is required.
Figure 7-3 Basic Settings page
Network Setting
Setting
Description
Default
MAC Address:
MAC address of the module
Not configurable
Use DHCP:
DHCP mode option
Disable (uncheck)
IP address:
IP address of the module
192.168.1.88
Subnet Mask:
Subnet Mask
255.255.255.0
Gateway:
Gateway
192.168.1.1
DNS Server:
DNS server IP address
114.114.114.114
Socket Setting
Setting
Description
Default
Start mode:
“AT Command Mode” or “Data pass-through mode”
“AT Command Mode”
Socket Type:
“TCP Server”, “TCP Client” or “UDP mode”
“TCP Server”