Wiznet W7500S2E Series, User Manual, Page: 21 / 52

W7500S2E serial to Ethernet module
W7500S2E user manual
18
RESET Save and restart module W 15 Reset if parameter equals to password
EXIT Exit AT command W - -
SAVE Save settings W - -
M
od
ul
e
se
tt
in
gs
c
om
m
an
d
START_MODE Start mode R/W 1
0: AT command mode (default)
1: Data pass-through mode
C1_OP Operating mode R/W 1
0: TCP server mode (default)
1: TCP client mode
2: UDP mode
IP_MODE IP configuration method R/W 1
0: Static IP mode (default)
1: DHCP mode
IP IP address R/W 15 Default: 192.168.1.88
MARK Subnet mask R/W 15 Default: 255.255.255.0
GATEWAY Gateway R/W 15 Default: 192.168.1.1
DNS DNS server address R/W 15 Default: 114.114.114.114
C1_PORT Local port number R/W 5 1 ~ 65,535; Default: 5000
C1_BIND Local port binding R/W 1
Valid only in TCP Client mode:
0: Disable (default) 1: Enable
DNSEN DNS for remote host R/W 1 0: Disable (default) 1: Enable
C1_CLI_IP1 Remote host IP address R/W 15 Default: 192.168.1.99
C1_CLI_PP1 Remote host port number R/W 5 1 ~ 65,535; Default: 5000
DOMAIN Remote host name R/W 32 Default: www.iwiznet.cn
RECONTIME Reconnection interval R/W 5
Valid only in TCP client mode
Value range: 0~60000; Unit: ms
Default: 0 (reconnect immediately)
NETBIOS NetBIOS R/W 1
0: Disable (default)
1: Enable
Se
ria
l s
et
tin
gs
c
om
m
an
d
C1_BAUD Baud rate index R/W 2
0: 300
1: 600
2: 1,200
3: 2,400
4: 4,800
5: 9,600
6: 14,400
7: 19,200
8: 38,400
9: 56,000
10: 57,600
11: 115,200
12: 128,000
13: 230,400
14: 256,000
15: 460,800
(default)
C1_DATAB Data bit index R/W 1
0: 7 bit
1: 8 bit (default)
C1_STOPB Stop bit R/W 1
0: 1 bit (default)
1: 2 bit
C1_PARITY Parity bit R/W 1
0: Disable (default)
1: Odd
2: Even
C1_SER_C
Serial flow control /
RS-485 enable output
R/W 1
0: Disable (default)
1: Enable CTS/RTS hardware flow control